目前電腦裝有雙系統,開啟電源後不久就會進入linux的Grub開機選單!
如果放著10秒鐘不去動它,就會直接進入最上頭的選項,而這個選項是就是Ubuntu
如何修改開機選單,使它放著不動的話,自己進到windows?這樣按下電源啟動之後,就可以做其他事等到windows登入畫面出來後再key in密碼即可。
先去 /boot/grub/grub.cfg 看看
目前電腦裝有雙系統,開啟電源後不久就會進入linux的Grub開機選單!
如果放著10秒鐘不去動它,就會直接進入最上頭的選項,而這個選項是就是Ubuntu
如何修改開機選單,使它放著不動的話,自己進到windows?這樣按下電源啟動之後,就可以做其他事等到windows登入畫面出來後再key in密碼即可。
先去 /boot/grub/grub.cfg 看看
當在vmware player上安裝ubuntu 12.04時,出現以下畫面,且一直無法出現GUI畫面,請用以下解決方法:
******************************************************************
******************************************************************
Vmware Easy Install
PLEASE WAIT! VMware Tools is currently being
installed on your system. Depending on the
version of Ubuntu you are installing, you may
log in below and use the system during
intallation. Otherwise, please wait for the
graphical environment to launch. Thank you.
******************************************************************
******************************************************************
ubuntu login:_
解決方法
Follow the 3 Steps ...
Restore the /etc/issue
file:
sudo mv /etc/issue.backup /etc/issue
Restore the /etc/rc.local
file: